What is a Percentage Calculator?
A percentage is a fraction with a denominator of 100, so 20% means 20 per hundred, or 0.20. Almost every percentage question is one of three shapes, and this calculator gives each its own panel so the numbers cannot be confused: a percentage of a value, one value as a percentage of another, and the change between an old and a new value.
The first shape multiplies. Twenty percent of 150 is 150 × 0.20 = 30. The second divides: 30 out of 120 is 30 ÷ 120 = 0.25, or 25%. The third compares two values against the original: going from 80 to 100 is (100 − 80) ÷ 80 = 25%, while going from 100 to 80 is (80 − 100) ÷ 100 = −20%. The asymmetry is not a bug; it is why a 25% pay cut needs a 33% rise to recover.
Two distinctions explain most percentage mistakes. A percentage point is an absolute difference between two percentages — moving from 4% to 5% is one percentage point but a 25% relative increase. And percentages cannot be added unless they share a base: a 10% rise followed by a 10% rise is 21%, not 20%, because the second rise applies to the larger amount.
How to use the percentage calculator
- For “what is P% of X”, type the percentage and the value in the first panel. The answer appears immediately.
- For “X is what percent of Y”, put the part in the first field and the whole in the second.
- For a change, enter the original value first and the new value second. The sign tells you whether it rose or fell.
- Leave any field empty to keep its panel blank — the three calculations are independent.
- Read the note under the panels when a result looks surprising; a zero base or a negative original value changes the interpretation.
Percentage Calculator limits and rules
| Item | Limit |
|---|---|
| Modes | Percent of a value, value as a percent, percent change |
| Precision | Rounded to two decimal places for display |
| Zero base | Percentage change is undefined and shown as a dash |
| Negative values | Accepted; change is divided by the absolute original |
| Percentage points | Not calculated separately — subtract the two percentages yourself |
| Successive changes | Not compounded; each panel takes two values only |
| Rounding | Display only — the underlying arithmetic is not rounded |
| Units | None; both values must be in the same unit |
When to use it
- Working out a discount: 30% of 79.99 is 24.00 off, leaving 55.99.
- Checking a test score: 42 out of 50 is 84%.
- Reading a pay rise: 48,000 to 51,500 is a 7.29% increase.
- Comparing two periods of traffic or revenue, where the absolute numbers differ but the rate is what matters.
- Converting a survey share into a count: 12% of 250 respondents is 30 people.
Is it private?
Everything runs inside your browser. Your text and files are never uploaded, never stored and never seen by anyone else — including me. You can use the tool with the network tab open and watch no request leave the page. Closing the tab erases the input.
Frequently asked questions
A percentage point is the arithmetic difference between two percentages. If an interest rate moves from 4% to 5%, it has risen by 1 percentage point, which is also a 25% relative increase. News reports mix the two constantly; the distinction matters whenever the base is small.
Because the rise applies to a smaller base. 100 falling 25% gives 75; a 25% rise on 75 gives 93.75. To get back to 100 you need a 33.3% rise. Percentage changes are always relative to where you started, which is why the calculator divides by the original value.
Multiply the price by the discount percentage divided by 100 to get the amount off, then subtract it. A 30% discount on 79.99 is 24.00 off, so the price is 55.99. Equivalently, multiply by 0.70 — the fraction you keep.
Multiply by 1 plus the rate as a decimal. Adding 20% to 50 is 50 × 1.20 = 60. Do not add 20 to a percentage value directly, and do not apply the rate twice: 50 + 20% + 20% is 72, not 70, because the second 20% applies to 60.
Because the formula divides by the original value, and division by zero has no result. Going from 0 to 10 is not “infinity percent” in any useful sense; describe it as a new quantity rather than a percentage increase.
No. Each panel is a multiplication or a division on values in the page. Nothing is stored or transmitted, so you can use real prices, salaries or traffic figures without them leaving the browser.
Related tools
Written and maintained by Md. Nur Hossain Repon.